CAD to BIM Conversion Services: DWG & PDF to Revit BIM Models
ScanM2 provides CAD to BIM conversion services for architects, engineers, contractors and facility managers. We turn 2D CAD drawings, PDF sets and scanned paper plans into intelligent, data-rich BIM models in Revit or Archicad – architecture, structure and MEP – ready for design, coordination, documentation and facility management.
- DWG, PDF, scanned drawings and sketches to BIM
- Architectural, structural and MEP modeling
- LOD 200–400, agreed per discipline
- RVT, PLN, IFC, NWC/NWD, DWG, PDF deliverables
- Most projects delivered within a few days
Contact Us Now for a Free Consultation!
What Is CAD to BIM?
CAD to BIM is the process of converting 2D CAD drawings – DWG files, PDFs or scanned paper plans – into a 3D Building Information Model. Instead of separate lines on separate sheets, the model contains real walls, floors, doors, beams, ducts and pipes with dimensions, materials and data.
From one BIM model you can generate consistent plans, sections, elevations and schedules, run clash detection, extract quantities and hand over a digital record of the building to facility management.
CAD vs. BIM
| CAD (2D) | BIM (3D model) | |
| Content | Lines, hatches and text | Building elements with data |
| Changes | Each sheet edited separately | Change once, all views update |
| Coordination | Manual overlay of drawings | Clash detection between disciplines |
| Quantities | Measured by hand | Extracted from the model |
| Lifecycle use | Drawings only | Model for operation and facility management |
Types of CAD to BIM Conversions We Offer
DWG / AutoCAD to BIM
We convert AutoCAD DWG files into coordinated Revit or Archicad models, using your layers, levels and grids as the base.
PDF to BIM
No CAD files? We build accurate BIM models from PDF drawing sets, calibrating scale and cross-checking dimensions between plans, sections and elevations.
Scanned Drawings and Sketches to BIM
Old paper blueprints and hand sketches are digitized and converted into intelligent models – a common need for older buildings without digital records.
Multi-Discipline CAD to BIM
Architectural, structural and MEP models from the same drawing set, delivered separately or as one coordinated model.
What We Model
- Architecture – walls, floors, roofs, ceilings, doors, windows, stairs, rooms and finishes
- Structure – grids, foundations, columns, beams, slabs, bracing
- MEP – HVAC ducts and equipment, piping, plumbing, electrical and fire protection
- Documentation – sheets, plans, sections, elevations, schedules and tags generated from the model
- Revit families – custom parametric content where standard families are not enough
LOD and Project Stage
- LOD 200 – concept and feasibility models from early drawings
- LOD 300 – accurate geometry for design development, permits and construction documents
- LOD 350 – coordination between disciplines and clash detection
- LOD 400 – fabrication-level detail for selected elements
For whole-building modeling and coordination see our BIM modeling services.
Our CAD to BIM Process
- Drawing review. We review your CAD files, PDFs or scans, check completeness and list open questions.
- Scope and standards. We agree disciplines, LOD, software, template, naming and deliverables.
- Modeling. We build the BIM model from the 2D documentation – without point cloud data – discipline by discipline.
- Coordination. If required, models are combined in Navisworks and clashes are resolved.
- Quality control. The model and sheets are checked against the source drawings and the agreed scope.
- Delivery. You receive RVT, PLN, IFC, NWC/NWD, DWG or PDF files with documentation, ready for construction management, cost estimation and facility maintenance.
What to Send for a Quote
- CAD files, PDFs or scans of the drawings you have
- which disciplines you need – architecture, structure, MEP
- required LOD, software version and template
- deliverables – model only or model plus sheets
- deadline
CAD to BIM or Scan to BIM?
CAD to BIM follows your drawings. If the drawings are outdated or the building has changed over the years, the model will repeat those differences. In that case we recommend 3D laser scanning and Scan to BIM, or a combination: drawings for the overall layout and a scan to verify critical areas. If you need drawings only, see our as-built drawings service.
CAD to BIM Project Examples
CAD to BIM Services Examples
Why Choose ScanM2 for CAD to BIM
- Experience in Revit and Archicad modeling
- All disciplines – architecture, structure and MEP
- Your standards – templates, families and naming
- Fast delivery – most projects within a few days
- Projects in the USA, Europe and other countries
Industries We Serve
- Architecture – renovation and redesign based on existing drawings
- Construction – coordination and quantity take-off
- Engineering – structural and MEP models
- Facility management – digital records of existing buildings

Frequently Asked Questions
What is the difference between CAD and BIM?
How long does CAD to BIM conversion take?
Which software and formats do you use?
Can you convert old CAD drawings or scanned paper plans to BIM?
Do you provide MEP modeling as part of CAD to BIM?
What LOD do you deliver?
What if the drawings do not match the existing building?
How much does CAD to BIM conversion cost?
Ready to modernize your CAD drawings? Contact us for a free quote or sample CAD to BIM conversion today.





