Revit Family Creation Services

Revit Family Creation Services

Every Revit model is only as good as the families inside it. Generic content from online libraries often has the wrong dimensions, too much geometry, missing parameters or no connectors – and the problems show up later in schedules, clash reports and file size. ScanM2 creates custom Revit families for architects, engineers, contractors and building product manufacturers: clean, parametric and built to your standards, so they work the same way in every project.

Contact Us Now for a Free Consultation!

We build families from the information you already have – product data sheets, CAD drawings, PDFs or sketches. Because 3D laser scanning is our core work, we can also model families from a scan of an existing object: a piece of installed equipment, a historic window or a non-standard detail that no manufacturer library contains.

What Is a Revit Family?

A Revit family is a reusable component with its own geometry, parameters and behaviour: a door, a column, an air handling unit or a light fixture. Loadable families are stored as RFA files and loaded into projects, system families (walls, floors, roofs, ducts, pipes) are defined inside the project template, and annotation families control tags and symbols on sheets. A well-built family flexes correctly when parameters change, shows the right level of detail in each view and carries the data needed for schedules and quantity take-offs.

Revit Families We Create

DisciplineTypical families
ArchitecturalDoors, windows, curtain wall panels, casework, furniture, railings, stairs components, ceilings and specialty equipment
StructuralColumns, beams and steel sections, trusses, base plates, connections, foundations and precast elements
Mechanical / HVACAir handling units, fan coil units, diffusers and grilles, dampers, duct fittings, pumps and chillers
PlumbingFixtures, valves, pipe fittings, pipe supports and hangers, water heaters, tanks and gauges
ElectricalPanels and distribution boards, transformers, switches and sockets, light fixtures, fire alarm devices
Fire protectionSprinkler heads, valves, fire cabinets and fittings
Manufacturer productsProduct families with all sizes and options of a product line, ready for download from your website

MEP families include correctly configured connectors (duct, pipe, electrical), flow directions and system classifications, so they connect to systems and work in Revit analysis and schedules. For more on MEP modeling see our Revit MEP BIM services, Revit plumbing design and Revit mechanical design pages.

Parametric and Non-Parametric Families

Parametric families are driven by dimensions and type parameters: one door family can produce every width, height and panel option you need. We set up reference planes, constraints, formulas and visibility controls so the family flexes without errors. When a product has many variations, we use a type catalog (TXT) instead of loading dozens of types into the project.

Non-parametric families are fixed objects – a specific piece of equipment, a sculpture or an existing element captured from a laser scan. They are lighter and faster to build, and the right choice when the size never changes.

We agree with you which parameters must be adjustable before modeling starts, so the family is flexible where you need it and simple everywhere else.

Families From Laser Scans of Existing Objects

On renovation and as-built projects, many elements do not exist in any library: decorative mouldings, historic windows and doors, installed equipment, non-standard brackets or industrial components. We scan the object with a terrestrial laser scanner (typical accuracy ±2–3 mm), process the point cloud and model the family from the measured geometry. The family can then be placed wherever the element repeats in the building.

This is useful together with Scan to Revit projects: repeating elements are modeled once as families, which keeps the model lighter and makes it easier to schedule them.

What We Need From You

  • product data sheets, cut sheets or catalogues
  • 2D CAD drawings (DWG, DXF) or PDF drawings
  • 3D files from other software (for example SketchUp, IFC or STEP), where available
  • photos and sketches with key dimensions
  • or a laser scan / site visit for existing objects
  • your Revit version, template, naming conventions and shared parameters file, if you have them

If the source information is incomplete, we send you a list of open questions before modeling instead of guessing.

What You Receive

DeliverableDetails
Family filesRFA in your Revit version; type catalogs (TXT) for product lines with many variations
ParametersType and instance parameters, shared parameters from your file, formulas for dependent dimensions
Level of detailCoarse / medium / fine representations and LOD agreed per family (typically LOD 200–400)
DataMaterials, manufacturer, model, description, classification codes (OmniClass / Uniformat) if required
MEPConfigured connectors, system classification, flow direction
Test projectAn RVT file showing every family placed and flexed, so you can check them before use
Other formatsIFC export of the families on request

How We Create Revit Families

  1. Review the request. We look at your list of families, source files and standards and agree on the scope, parameters and level of detail.
  2. Plan the family structure. We choose the right family template and category, hosting (wall, floor, ceiling, face or unhosted) and which values will be type or instance parameters.
  3. Model the geometry. Reference planes and constraints first, then lightweight geometry for each detail level, with materials and subcategories for visibility control.
  4. Add data and connectors. Parameters, formulas, type catalogs, identity data and MEP connectors.
  5. Test. Every family is flexed through its sizes, checked in plan, section and 3D views at each detail level, placed in a test project and checked in schedules.
  6. Deliver and adjust. You review the families in your own projects; we make corrections within the agreed scope.

Family Quality Standards

  • Lightweight files: no imported CAD geometry and no unnecessary detail in coarse views, so large projects stay fast.
  • Your standards first: naming, parameters, materials and subcategories follow your template or BIM execution plan; if you have none, we follow a consistent naming convention and document it.
  • Correct category and behaviour: the right category for schedules and filters, correct hosting and cut behaviour.
  • Clean files: purged of unused content and checked for warnings before delivery.

Who We Work With

  • Architects and interior designers – doors, windows, casework and furniture families matching the actual products in the specification.
  • MEP and structural engineers – equipment and component families with connectors and data for schedules and coordination.
  • Contractors and BIM coordinators – families for existing conditions and as-built models, including elements captured on site.
  • Building product manufacturers – BIM content for your product line so designers can specify your products directly in Revit.

Families are also part of our wider services: Revit BIM modeling, Revit drafting, Revit outsourcing and 3D rendering from Revit models.

FAQ

What is a Revit family?
A Revit family is a reusable component – such as a door, column, light fixture or air handling unit – with its own geometry, parameters and behaviour. Loadable families are saved as RFA files and loaded into projects; system families such as walls and pipes are defined in the project template.
What information do you need to create a Revit family?
Product data sheets, CAD or PDF drawings, photos with key dimensions or 3D files from other software. For existing objects we can laser scan the element. Please also send your Revit version, template and shared parameters file if you use them.
Can you create families from CAD drawings or product data sheets?
Yes. Most families are built from manufacturer data sheets and 2D CAD or PDF drawings. We do not import CAD geometry into the family; it is modeled natively in Revit so the file stays light and parametric.
Can you create MEP families with connectors?
Yes. Mechanical, plumbing, electrical and fire protection families get duct, pipe or electrical connectors with the correct system classification and flow direction, so they connect to systems in your model.
Can you follow our company BIM standards?
Yes. We use your family templates, naming conventions, shared parameters and materials. If you do not have standards yet, we use a consistent naming convention and document it for you.
Can you fix or optimize our existing Revit families?
Yes. We can clean up heavy or broken families, replace imported CAD geometry with native geometry, add missing parameters and connectors, and bring old families into line with your current standards.
How is the price calculated?
The price depends on the number of families, geometry complexity, the number of types and parameters, connectors and the quality of the source information. We send a quote after reviewing your list and files.

Ready to Discuss Your Revit Families?

Send us the list of families you need and the source files you have. We review them, ask questions where information is missing and send a quote based on the number and complexity of the families.

Contact Us Now for a Free Consultation!

We work in cities all over the world